Shop
CABLE connector for thin-film electrodes
TF-CABLE connector provides a universal interface between all standard MicruX' thin-film electrodes (up to four contact pads) and the potentiostat, enabling the use of microvolume (2 – 10 µL sample drops) or dipping into a solution.
CABLE connector for thin-film electrodes
Dimensions: 50 cm long
Contents: 1 x TF cable (with 2-mm male or female ends to be selected)
Details: Accessory for MicruX' thin-film electrodes
ED-TF-CABLE
Mediated Thick-film Carbon/CoPc Electrode
Mediated screen-printed electrodes featuring a carbon working electrode infused with Cobalt (II) Phthalocyanine. This mediator makes the electrodes suitable for using with oxidase enzymes where hydrogen peroxide (H2O2) is generated and detected at low potentials. Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. This technology enables the detection of numerous analytes in conjunction with specific oxidase type enzymes. Different accessories available.
Mediated Thick-film Carbon/CoPc Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: C-CoPc / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Enzyme-based sensors, biosensors, hydrogen peroxide (H2O2) detection
Contents: 50 units/box
ED-S1PE-C20/CoPc (50 units/box)
Mediated Thick-film Carbon/PB Electrode
Mediated screen-printed electrodes featuring a carbon working electrode infused with Prussian Blue. This mediator makes the electrodes specific to hydrogen peroxide (H2O2) detection at low potentials (near 0 V). Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. This technology enables the detection of numerous analytes in conjunction with specific oxidase type enzymes. Different accessories available.
Mediated Thick-film Carbon/PB Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: C-PB / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Enzyme-based sensors, biosensors, hydrogen peroxide (H2O2) detection
Contents: 50 units/box
ED-S1PE-C20/PB (50 units/box)
Mediated Thick-film Carbon/FeCN Electrode
Mediated screen-printed electrodes featuring a carbon working electrode infused with Potassium Ferrocyanide. This mediator enhances the suitability of the electrodes for using with Horseradish Peroxidase (HRP), enabling efficient detection of hydrogen peroxide (H2O2). Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. This technology enables the detection of numerous analytes in conjunction with peroxidase and other oxidase type enzymes. Different accessories available.
Mediated Thick-film Carbon/FeCN Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: C-FeCN / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Enzyme-based sensors, biosensors, hydrogen peroxide (H2O2) detection
Contents: 50 units/box
ED-S1PE-C20/FeCN (50 units/box)
Thick-film Graphene Electrode (Ceramic)
Graphene-based screen-printed electrodes with a very low electrical resistance and a good scratch resistance for using in a wide variety of applications, including the development of low-cost chemical-sensors and bio-sensors. Thick-film sensors fabricated on a rigid ceramic substrate with a classical three-electrodes approach. Ideal for surface treatments, modifications and coatings. Different accessories available.
Thick-film Graphene Electrode (Ceramic)
Dimensions: 27.5 x 10.1 x 0.38 mm
Substrate: Ceramic
Electrodes material: WE: Graphene / RE: Ag / AE: Graphene
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-CG20C (50 units/box)
Thick-film Graphene Electrode (RE: Ag/AgCl - Ceramic)
Graphene-based screen-printed electrodes, including a silver/silver chloride reference electrode, with a very low electrical resistance and a good scratch resistance for using in a wide variety of applications, such as the development of low-cost chemical-sensors and bio-sensors. Thick-film sensors fabricated on a rigid ceramic substrate with a classical three-electrodes approach. Ideal for surface treatments, modifications and coatings. Different accessories available.
Thick-film Graphene Electrode (RE: Ag/AgCl - Ceramic)
Dimensions: 27.5 x 10.1 x 0.38 mm
Substrate: Ceramic
Electrodes material: WE: Graphene - RE: Ag/AgCl - AE: Graphene
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-CG21C (50 units/box)
Thick-film Graphene Electrode (RE: Ag/AgCl)
Graphene-based screen-printed electrodes, including a silver/silver chloride reference electrode, with a very low electrical resistance and a good scratch resistance for using in a wide variety of applications, such as the development of low-cost chemical-sensors and bio-sensors. Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. Ideal for surface treatments, modifications and coatings. Different accessories available.
Thick-film Graphene Electrode (RE: Ag/AgCl)
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: Graphene - RE: Ag/AgCl - AE: Graphene
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-CG21 (50 units/box)
Low-cost Thick-film Carbon Electrode (RE: Ag/AgCl - Ceramic)
Low-cost carbon-based screen-printed electrodes, including a silver/silver chloride reference electrode, for basic electrochemical studies. Thick-film sensors fabricated on a rigid ceramic substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing excellent electrochemical performance with good reversibility when using cyclic voltammetry. Different accessories available.
Low-cost Thick-film Carbon Electrode (RE: Ag/AgCl - Ceramic)
Dimensions: 27.5 x 10.1 x 0.38 mm
Substrate: Ceramic
Electrodes material: WE: C - RE: Ag/AgCl - AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-C21C (50 units/box)
Thick-film Graphene Electrode
Graphene-based screen-printed electrodes with a very low electrical resistance and a good scratch resistance for using in a wide variety of applications, including the development of low-cost chemical-sensors and bio-sensors. Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. Ideal for surface treatments, modifications and coatings. Different accessories available.
Thick-film Graphene Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: Graphene / RE: Ag / AE: Graphene
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-CG20 (50 units/box)
High-performance Thick-film Carbon Electrode (Ceramic)
High-performance carbon-based screen-printed electrodes for the development of chemical sensors and biosensors. Thick-film sensors fabricated on a rigid cermaic substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Different accessories available.
High-performance Thick-film Carbon Electrode (Ceramic)
Dimensions: 27.5 x 10.1 x 0.38 mm
Substrate: Ceramic
Electrodes material: WE: C / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-C10C (50 units/box)
Thick-film Gold Electrode
Gold-based screen-printed electrodes fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Useful for building self-assembled monolayers (SAM) and the development of chemical sensors and biosensors. Different accessories available.
Thick-film Gold Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: Au / RE: Ag / AE: Au
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-Au10 (50 units/box)
Thick-film Gold Electrode (Ceramic)
Gold-based screen-printed electrodes fabricated on a rigid ceramic substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Useful for building self-assembled monolayers (SAM) and the development of chemical sensors and biosensors. Different accessories available.
Thick-film Gold Electrode (Ceramic)
Dimensions: 27.5 x 10.1 x 0.38 mm
Substrate: Ceramic
Electrodes material: WE: Au / RE: Ag / AE: Au
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-Au10C (50 units/box)
Low-cost Thick-film Carbon Electrode
Low-cost carbon-based screen-printed electrodes for basic electrochemical studies. Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing excellent electrochemical performance with good reversibility when using cyclic voltammetry. Different accessories available.
Low-cost Thick-film Carbon Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: C / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-C20 (50 units/box)
Low-cost Thick-film Carbon Electrode (RE: Ag/AgCl)
Low-cost carbon-based screen-printed electrodes, including a silver/silver chloride reference electrode, for basic electrochemical studies. Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing excellent electrochemical performance with good reversibility when using cyclic voltammetry. Different accessories available.
Low-cost Thick-film Carbon Electrode (RE: Ag/AgCl)
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: C - RE: Ag/AgCl - AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-C21 (50 units/box)
Low-cost Thick-film Carbon Electrode (Ceramic)
Low-cost carbon-based screen-printed electrodes for basic electrochemical studies. Thick-film sensors fabricated on a rigid ceramic substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing excellent electrochemical performance with good reversibility when using cyclic voltammetry. Different accessories available.
Low-cost Thick-film Carbon Electrode (Ceramic)
Dimensions: 27.5 x 10.1 x 0.38 mm
Substrate: Ceramic
Electrodes material: WE: C / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-C20C (50 units/box)
ECSens Electrochemical Sensing Interface
Entry-level ultra-compact and afforable potentiostat for initial electrochemical studies with the most common electroanalytical techniques, enabling a true on-site voltammetric and amperometric analysis. USB interfacing and fully controlled by MicruX EC Manager Lite software with multiplexing capabilities. Compatible with thick-film single-electrodes.
ECSens Electrochemical Sensing Interface
Dimensions: 36 x 15 x 8 mm (L x W x H)
Operating modes: Potentiostat (multi-channel mode available)
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 1.08 V
Compliance voltage: 2 V
DC-potential resolution: 250 µV
Applied potential accuracy: ≤ 0.1%
Current ranges: 6.5 µA to 0.75 mA (7 ranges)
Maximun DC current: ± 0.75 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.002 % of current range (130 pA on 6.5 µA range)
Housing: Aluminum case
Weight: < 5 g
Certificates: CE
Details: MicruX ECSens is provided with an electrode pack (S1PE) as well as all the accessories and software for interfacing with the computer and sensors.
ECSENS100
ECSens Electrochemical Sensing Interface
Entry-level ultra-compact and afforable potentiostat for initial electrochemical studies with the most common electroanalytical techniques, enabling a true on-site voltammetric and amperometric analysis. USB interfacing and fully controlled by MicruX EC Manager Lite software with multiplexing capabilities. Compatible with thick-film single-electrodes.
ECSens Electrochemical Sensing Interface
Dimensions: 36 x 15 x 8 mm (L x W x H)
Operating modes: Potentiostat (multi-channel mode available)
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 1.08 V
Compliance voltage: 2 V
DC-potential resolution: 250 µV
Applied potential accuracy: ≤ 0.1%
Current ranges: 6.5 µA to 0.75 mA (7 ranges)
Maximun DC current: ± 0.75 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.002 % of current range (130 pA on 6.5 µA range)
Housing: Aluminum case
Weight: < 5 g
Certificates: CE
Details: MicruX ECSens is provided with an electrode pack (S1PE) as well as all the accessories and software for interfacing with the computer and sensors.
ECSENS100
Thick-film Carbon Dual-Electrode
Carbon-based screen-printed dual-electrodes with a four-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Useful for developing low-cost, multiplexed chemical sensors and biosensors. Different accessories available.
Thick-film Carbon Dual-Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE1/2: C / RE: Ag / AE: C
WE size: 1,0x2.5 mm (2,3 mm2 )
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-D2PE-C10 (50 units/box)
dLSP-510 Digital Lab Single-Syringe Pump
High precision and stable fluid delivery single-channel digital pump, ideal for microfluidic, electrospinning, toxicology studies, capillary electrophoresis, neuroscience, etc. application.
dLSP-510 Digital Lab Single-Syringe Pump
Dimensions: 260 x185x180 mm (Dx W x H) drive unit, 190 mm x 123 mm x 33 mm (D x W x H) controller unit
Applications: Electrospinning, Microfluidics, Animal experiments, toxicology studies, Capillary electrophoresis, Drug Discovery, Cell Injections, Microcapsules, Catalyzer, Neuroscience, Organic Synthesis, Nutrition Science
Working mode: infusion, withdrawal, infusion/withdrawal, autorepeated, programming (on dedicated PC software)
Channels: 1
Motor type: Step motor
Microstepping: 1/64
Advance per step: 0.03255 µm / µstep
Maximum speed: 180 mm/min
Minimum speed: 0.0833 µm/min
Linear force: 40 lbs/18 kg (100% force selection)
Accuracy: ≤± 0,5 %
Flow rate: 0.0007 nL/ min (siringe 0.5 µL) - 120.044 mL /min (syringe 60 mL)
Syringe size: 0.5 µL - 60 mL
Comm. interface: USB-B, USB-A, Wifi, Bluetooth, Ethernet, etc
Display: 7 Inch, 1024x600, IPS HD LCD
Power supply: AC 100 V - 240 V-30 W 50/60 Hz
Operating temperature: 5 ºC - 40 º C
Humidity: < 85 %
Weight: 3.49 kg (drive unit), 0.37 kg (controller)
IP rate: IP31
Certificates: CE
LP-dLSP-510
dLSP- 520 Digital Lab Dual-Syringe Pump
High precision and stable fluid delivery dual-channel digital pump, ideal for microfluidic, electrospinning, toxicology studies, capillary electrophoresis, neuroscience, etc. application.
dLSP-520 Digital Lab Dual-Syringe Pump
Dimensions: Drive Unit: 260 mm x 185 mm x 180 mm (DxWxH), Control unit: 190mm x 123 mm x 33 mm (DxWxH)
Applications: Electrospinning, Microfluidics, Animal experiments, toxicology studies, Capillary electrophoresis, Drug Discovery, Cell Injections, Microcapsules, Catalyzer, Neuroscience, Organic Synthesis, Nutrition Science
Working mode: infusion, withdrawal, infusion/withdrawal, autorepeated, programming (on dedicated PC software)
Channels: 2
Motor type: Step motor
Microstepping: 1/64
Advance per step: 0.03255 µm/ µstep
Maximum speed: 180 mm/min
Minimum speed: 0.0833 µm/min
Linear force: 40 lbs/18 kg (100% force selection)
Accuracy: ≤± 0,5 %
Flow rate: 0.0007 nl/min (0.5 µL syringe) - 74-786 mL/min (30 mL syringe)
Syringe size: 0.5 µL - 30 mL
Comm. interface: USB-B, USB-A, Wifi, Bluetooth, Ethernet, etc
Display: 7 inch, 1024x600, ISP HD LCD
Power supply: AC 100V-240V/30 W 50/60Hz
Operating temperature: 5ºC - 40º C
Humidity: <85%
Weight: 3.49 kg (drive unit), 0.37 kg (controller)
IP rate: IP31
Certificates: CE
LP-dLSP-520
AIO cell Add-on - Batch Cell PEEK-5.0
Organic solvent compatibility. Perfect add-on for applications where larger sample volume are required (up to 400 µL). Compatible with standard thin-film electrodes and EEP platform.
AIO cell Add-on - Batch Cell PEEK-5.0
Material: PEEK
Electrochemical cell: 5.0 mm Ø
Sample volume: up to 400 µL
Applications: Organic solvents resistance
ED-AIO-ADD-ON-BC-PEEK-5.0
AIO cell Add-on - Batch Cell PEEK-5.0
Organic solvent compatibility. Perfect add-on for applications where larger sample volume are required (up to 400 µL). Compatible with standard thin-film electrodes and EEP platform.
AIO cell Add-on - Batch Cell PEEK-5.0
Material: PEEK
Electrochemical cell: 5.0 mm Ø
Sample volume: up to 400 µL
Applications: Organic solvents resistance
ED-AIO-ADD-ON-BC-PEEK-5.0
AIO cell Add-on - Batch Cell PMMA-5.0
Enables the use of the standard thin-film (micro)electrodes in applications where larger sample volumen are required (up to 400 µL). Compatible with EEP platform.
AIO cell Add-on - Batch Cell PMMA-5.0
Material: PMMA
Electrochemical cell: 5.0 mm Ø
Sample volume: up to 400 µL
ED-AIO-ADD-ON-BC-PMMA-5.0
AIO cell Add-on - Batch Cell PMMA-5.0
Enables the use of the standard thin-film (micro)electrodes in applications where larger sample volumen are required (up to 400 µL). Compatible with EEP platform.
AIO cell Add-on - Batch Cell PMMA-5.0
Material: PMMA
Electrochemical cell: 5.0 mm Ø
Sample volume: up to 400 µL
ED-AIO-ADD-ON-BC-PMMA-5.0
NE-1002X Programmable Microfluidics Single-Syringe Pump
NE-1002X is a fully programmable syringe pump with infusion and withdrawal mode. It can holds 1 syringe up to 60 mL with infusion rates from 0.008 nL/hr to 2545 µL/min. It is also available in two channel version (Model NE-4002X)
NE-1002X Programmable Microfluidics Single-Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/16 to 1/2 depending on motor speed
Advance per step: 4.252 nm to 34.018 nm depending on motor speed
Maximum speed: 2.24 mm/min
Minimum speed: 0.014 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007nL/hr to 2505 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-1002X
NE-4002X Programmable 2 Channel Microfluidics Syringe Pump
NE-4002X is a fully programmable 2 channel syringe pump with infusion and withdrawal mode. It can holds 2 syringe up to 60 mL with infusion rates from 0.007 nL/hr to 1479 µL/min.
NE-4002X Programmable Microfluidics Dual-Channel Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 2
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed
Maximum speed: 184 mm/min
Minimum speed: 1.3 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007 nL/hr to 1480 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-4002X
NE-8000 High Pressure Programmable Single Syringe Pump
NE-8000 is a fully programmable stand-alone high pressure syringe pump with infusion and withdrawal mode. It holds 1 syringe up to 140 mLwith infusion rates from 1.733 µL/hr to 340.6 mL/min
Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump
Using 2 NE-8000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.
NE-8000 High Pressure Programmable Single-Syringe Pump
Dimensions: 285 x 155 x 162 mm (L x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/1 depending on motor speed
Advance per step: 0.505 µm to 4.042 µm depending on motor speed
Maximum speed: 300.3 mm/min
Minimum speed: 1.66 µm/min
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 1.726 µL/hr to 247.40 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Weight: 3.5 kg
Certificates: CE
NE-8000
ECStat Electrochemical Station
USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platforms, thick-film and thin-film electrodes.
ECStat Electrochemical Station
Dimensions: 160 x 100 x 45 mm (L x W x H)
Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 10 V
Compliance voltage: ± 10 V
DC-potential resolution: 75 µV
Applied potential accuracy: ≤ 0.1% ± 1 mV offset
Current ranges: 100 pA to 10 mA (9 ranges)
Maximun DC current: ± 30 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)
EIS - Frequency range: 10 μHz to 1 MHz
EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p
Housing: Aluminum case
Weight: < 0.5 Kg
Certificates: CE
Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.
ECSTAT
ECStat Electrochemical Station
USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platforms, thick-film and thin-film electrodes.
ECStat Electrochemical Station
Dimensions: 160 x 100 x 45 mm (L x W x H)
Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 10 V
Compliance voltage: ± 10 V
DC-potential resolution: 75 µV
Applied potential accuracy: ≤ 0.1% ± 1 mV offset
Current ranges: 100 pA to 10 mA (9 ranges)
Maximun DC current: ± 30 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)
EIS - Frequency range: 10 μHz to 1 MHz
EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p
Housing: Aluminum case
Weight: < 0.5 Kg
Certificates: CE
Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.
ECSTAT
High-performance Thick-film Carbon Electrode
High-performance carbon-based screen-printed electrodes for the development of chemical sensors and biosensors. Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Different accessories available.
High-performance Thick-film Carbon Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: C / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-C10 (50 units/box)
All-In-One SPE Platform (1xAdd-on)
AIO-SPE cell with one add-on for using printed electrodes in static or dynamic conditions. Compatible with Flow or Batch add-ons. The cell is also compatible with EEP platform.
All-In-One SPE Platform (1xAdd-on)
Material: Aluminium base + methacrylate add-ons
Dimensions: 60 x 40 x 15/30 mm (W x D x H)
Contents: AIO cell + 1 Add-on (to be chosen) + SPE cable (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-SPE-CELL-1x
All-In-One SPE Platform (2xAdd-ons)
AIO-SPE cell with two add-ons for using printed electrodes in static and dynamic conditions. The cell includes the Flow and Batch add-ons. The cell is also compatible with EEP platform.
All-In-One SPE Platform (2xAdd-ons)
Material: Aluminium base + methacrylate add-ons
Dimensions: 60 x 40 x 15/30 mm (W x D x H)
Contents: AIO cell + 2 Add-ons (Flow and Batch) + SPE cable (male or female banana end)
Details: Easy and fast electrode replacement. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-SPE-CELL-2x
L100-1E Basic Single-channel Peristaltic Pump
Compact single-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1E Basic Single-channel Peristaltic Pump
Dimensions: 197 x 110 x 91 mm (L x W x H)
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 2 LED indicators for running direction
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-L100-1E/DG-1(10)
L100-1E Basic Dual-channel Peristaltic Pump
Compact dual-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1E Basic Dual-channel Peristaltic Pump
Dimensions: 197 x 110 x 91 mm (L x W x H)
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 2 LED indicators for running direction
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 15W
Operating temperature: 0 to 40 ºC
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-L100-1E/DG-2(10)
L100-1S Standard Single-channel Peristaltic Pump
Standard single-channel peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1S Standard Single-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Working mode: Speed control and flow rate mode
Channels: 1
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: RS485. Longer or Modbus protocol
Speed: 0.01 -100 rpm, CW/CCW
Speed precision: 0.01 rpm
Control mode: Membrane keypad, external signal and communication control
Display: LCD
Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 25W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.38 Kg
IP rate: IP31
Certificates: CE
LP-L100-1S/DG-1(10)
L100-1S Standard Dual-channel Peristaltic Pump
Standard dual-channel peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1S Standard Dual-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Working mode: Speed control and flow rate mode
Channels: 2
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: RS485. Longer or Modbus protocol
Speed: 0.01 -100 rpm, CW/CCW
Speed precision: 0.01 rpm
Control mode: Membrane keypad, external signal and communication control
Display: LCD
Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 25W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.38 Kg
IP rate: IP31
Certificates: CE
LP-L100-1S/DG-2(10)
L100-1S Standard Multi-channel (4) Peristaltic Pump
Standard 4-channels peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1S Standard Multi-channel (4) Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Working mode: Speed control and flow rate mode
Channels: 4
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: RS485. Longer or Modbus protocol
Speed: 0.01 -100 rpm, CW/CCW
Speed precision: 0.01 rpm
Control mode: Membrane keypad, external signal and communication control
Display: LCD
Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 25W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.38 Kg
IP rate: IP31
Certificates: CE
LP-L100-1S/DG-4(10)
L100-1F Intelligent Single-channel Peristaltic Pump
Smart single-channel peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1F Intelligent Single-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 1
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
LP-L100-1F/DG-1(10)
L100-1F Intelligent Dual-channel Peristaltic Pump
Smart dual-channel peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1F Intelligent Dual-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 2
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
LP-L100-1F/DG-2(10)
L100-1F Intelligent Multi-channel (4) Peristaltic Pump
Smart 4-channels peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1F Intelligent Multi-channel (4) Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 4
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
LP-L100-1F/DG-4(10)
L100-1FS Intelligent Single-channel Peristaltic Pump
Smart single-channel peristaltic pump with automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring. Intuitive graphic interface and modular programming, quickly set up your own application process. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1FS Intelligent Single-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 1
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
Details: Automatic identification of pump head and tubing.
LP-L100-1FS/DG-1(10)
L100-1FS Intelligent Dual-channel Peristaltic Pump
Smart dual-channel peristaltic pump with automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring. Intuitive graphic interface and modular programming, quickly set up your own application process. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1FS Intelligent Dual-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 2
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
Details: Automatic identification of pump head and tubing.
LP-L100-1FS/DG-2(10)
L100-1FS Intelligent Multi-channel (4) Peristaltic Pump
Smart 4-channels peristaltic pump with automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring. Intuitive graphic interface and modular programming, quickly set up your own application process. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1FS Intelligent Multi-channel (4) Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 4
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
Details: Automatic identification of pump head and tubing.
LP-L100-1FS/DG-4(10)
BT100-3J Precise Dual-channel Peristaltic Pump
Basic peristaltic pump with 2-channels. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.0002 to 32 mL/min. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-3J Precise Dual-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 3 LED indicators for operating state
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 30W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-BT100-3J/DG-2(10)
BT100-3J Precise Single-channel Peristaltic Pump
Basic single-channel peristaltic pump. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.0002 to 32 mL/min. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-3J Precise Single-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 3 LED indicators for operating state
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 30W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-BT100-3J/DG-1(10)
BT100-1F Dispensing Single-channel Peristaltic Pump
Single-channel peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Single-channel Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-1(10)
BT100-1F Dispensing Dual-channel Peristaltic Pump
Dual-channel peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Dual-channel Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-2(10)
BT100-1F Dispensing Multi-channel (4) Peristaltic Pump
4-channels peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Multi-channel (4) Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 4
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-4(10)
BT100-1L Multi-channel (4) Peristaltic Pump
Flow rate 4-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (4) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 4
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-4(10)
BT100-1L Multi-channel (6) Peristaltic Pump
Flow rate 6-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (6) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 6
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-6(10)
BT100-1L Multi-channel (8) Peristaltic Pump
Flow rate 8-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (8) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 8
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-8(10)
BT100-1L Multi-channel (12) Peristaltic Pump
Flow rate 12-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (12) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 12
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-12(10)
BT100-1L Multi-channel (16) Peristaltic Pump
Flow rate 16-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (16) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 16
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-8(10)*2
BT100-1L Multi-channel (24) Peristaltic Pump
Flow rate 24-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (24) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 24
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-12(10)*2
AIO-SPE cell Add-on - Batch Cell PMMA
Enables the use of the standard thick-film electrodes in applications where larger sample volumen are required (up to 1 mL). Compatible with screen-printed electrodes S1PE and EEP platform.
AIO-SPE cell Add-on - Batch Cell PMMA
Material: PMMA
Electrochemical cell: up to 8 mm Ø
Sample volume: up to 1 mL
Contents: 1 x BC-PMMA Add-on / 2 x O-rings
Details: The add-on is joined to the AIO support by means of magnets. Compatible with standard printed electrodes.
ED-AIO-SPE-ADD-ON-BC-PMMA
AIO-SPE cell Add-on - Flow Cell PMMA
Wall-jet flow-cell add-on for standard thick-film electrodes. Ideal for integrating a EC detection system in flowing liquids such as FIA, HPLC, CE... Low dead volume and sample requirements. Compatible with screen-printed electrodes S1PE.
AIO-SPE cell Add-on - Flow Cell PMMA
Material: PMMA
Electrochemical cell: up to 8 mm Ø
Contents: 1 x FC-PMMA Add-on / 2 x O-rings
Details: The add-on is joined to the base-cell (AIO-SPE) by means of magnets. Compatible with standard screen-printed elctrodes.
ED-AIO-SPE-ADD-ON-FC-PMMA
BOX connector for thick-film electrodes
SPE-BOX connector provides an interface between the screen-printed electrodes and any kind of potentiostat, enabling the use of microvolume (20 – 50 μL sample drops).
BOX connector for thick-film electrodes
Dimensions: 58 x 40 x 15 mm (L x W x H)
Contents: 1 x BOX interface (with 2-mm female terminals)
Details: Accessory for thick-film electrodes
ED-SPE-BOX
CABLE connector for thin-film IDE electrodes
IDE-CABLE connector provides an interface between the thin-film IDµElectrodes (IDE - two contact pads) and the potentiostat, enabling the use of microvolume (2 – 10 µL sample drops) or dipping into a solution.
CABLE connector for thin-film IDE electrodes
Dimensions: 50 cm long
Contents: 1 x IDE cable (with 2-mm male or female ends to be selected)
Details: Accessory for thin-film InterDigitated Electrodes (IDE)
ED-IDE-CABLE
CABLE connector for thick-film electrodes
SPE-CABLE connector provides an interface between the printed electrodes and the potentiostat, enabling the use of microvolume (20 – 50 μL sample drops) or dipping into a solution.
CABLE connector for thick-film electrodes
Dimensions: 50 cm long
Contents: 1 x SPE cable (with 2-mm male or female ends to be selected)
Details: Accessory for thick-film electrodes
ED-SPE-CABLE
Bipotentiostat Cable
Bipotentiostat cable with 2-mm male banana plug (+ alligator clips) for using in combination with MicruX® ECStat to connect the electrodes of detection system.
Bipotentiostat Cable
Dimensions: 100 cm long
Contents: 1 x Bipot cable (male end) + 4 x alligator clips
Details: Accessory for MicruX® ECStat electrochemical workstation
ECSTAT-CAB2M
Bipotentiostat USB-Cable
Bipotentiostat cable with miniUSB plug for using in combination with MicruX® ECStat to directly connect the MicruX’ electrochemical platforms with thin-film electrodes.
Bipotentiostat USB-Cable
Dimensions: 50 cm long
Contents: 1 x Bipot cable (miniUSB end)
Details: Accessory for MicruX® ECStat electrochemical workstation and MicruX' electrochemical platforms
ECSTAT-USB
LSP01-3A Single-channel Syringe Pump
Just infusion single-channel syringe pump with 5 µm/min minimum linear speed. The acceptable syringe specification is from 10 μL to 60 mL Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
LSP01-3A Single-channel Syringe Pump
Dimensions: 280 x 210 x 140 mm (D x W x H)
Working mode: Infusion
Channels: 1
Advance per step: 0.156 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.83 nL/min – 54.2 mL/min
Syringe size: 10 µL – 60 mL
Comm. interface: RS485
Pump stroke: 140 mm
Max. linear rate: 65 mm/min
Min. linear rate: 5 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.6 Kg
Certificates: CE, EMC, ESD ≥ Level IV (IEC 61000-4-2)
LSP01-3A
LSP02-2B Dual-channel Syringe Pump
2-channels syringe pump with infusion/ withdrawal mode. The acceptable syringe specification is from 10 µL to 140 mL. Suitable for high accuracy and small flow rate liquid transferring. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
LSP02-2B Dual-channel Syringe Pump
Dimensions: 280 x 250 x 140 mm (D x W x H)
Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous
Channels: 2
Advance per step: 0.156 µm
Linear force: > 180 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.83 nL/min – 150.5 mL/min
Syringe size: 10 µL – 140 mL
Comm. interface: RS485
Pump stroke: 140 mm
Max. linear rate: 130 mm/min
Min. linear rate: 5 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 20W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 4.3 Kg
Certificates: CE, EMC, ESD ≥ Level IV (IEC 61000-4-2)
LSP02-2B
Multi8x All-In-One Platform - Base
User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with up to eight standard thin-film (micro)electrodes. Includes the basic assembly parts for the different multi8x add-ons.
Multi8x All-In-One Platform - Base
Material: Aluminium base + methacrylate cover
Dimensions: 120 x 60 x 25 mm (W x D x H)
Contents: Multi8x AIO interface + miniUSB box + cables (male or female banana end)
Details: Easy and fast electrode replacement. For multiplexing analysis up to 8 sensors. Reusable - long life
ED-MULTI8x-AIO-CELL
Multi8x All-In-One Platform - Base
User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with up to eight standard thin-film (micro)electrodes. Includes the basic assembly parts for the different multi8x add-ons.
Multi8x All-In-One Platform - Base
Material: Aluminium base + methacrylate cover
Dimensions: 120 x 60 x 25 mm (W x D x H)
Contents: Multi8x AIO interface + miniUSB box + cables (male or female banana end)
Details: Easy and fast electrode replacement. For multiplexing analysis up to 8 sensors. Reusable - long life
ED-MULTI8x-AIO-CELL
Multi8x AIO cell Add-on - Flow-cell PEEK-3.5
Organic solvent compatibility. Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
Multi8x AIO cell Add-on - Flow-cell PEEK-3.5
Material: PEEK
Electrochemical cell: 3.5 mm Ø
Applications: Organic solvents resistance
Contents: 1 x Multi8x FC-PEEK-3,5 Add-on
Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-ADD-ON-8x-FC-PEEK-3.5
Multi8x AIO cell Add-on - Flow-cell PEEK-3.5
Organic solvent compatibility. Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
Multi8x AIO cell Add-on - Flow-cell PEEK-3.5
Material: PEEK
Electrochemical cell: 3.5 mm Ø
Applications: Organic solvents resistance
Contents: 1 x Multi8x FC-PEEK-3,5 Add-on
Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-ADD-ON-8x-FC-PEEK-3.5
Multi8x AIO cell Add-on - Batch-cell PEEK-5.0
Organic solvent compatibility. Enables the use of up to eight standard thin-film (micro)electrodes in applications where larger sample volume (up to 400 µL per cell) are required. The batch cell add-on features correspond to a column (A→H) of a 96-well microplate. Compatible with SE1, IDA, IDRA, IDE and mSE thin-film electrodes.
Multi8x AIO cell Add-on - Batch-cell PEEK-5.0
Material: PEEK
Electrochemical cell: up to 5 mm Ø
Sample volume: up to 400 µL
Applications: Organic solvents resistance
Contents: 1 x Multi8x BC-PEEK-5,0 Add-on
Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6, ED-IDE1, ED-IDE2, ED-IDE3 & ED-IDRA1.
ED-ADD-ON-8x-BC-PEEK-5.0
Multi8x AIO cell Add-on - Thin-layer PEEK-1.0
Organic solvent compatibility. Thin-layer flow-cell to use microfluidic electrochemical sensors in a flow system. Improves the control of fluids. Better precision with low dead volume and low sample. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.
Multi8x AIO cell Add-on - Thin-layer PEEK-1.0
Material: PEEK
Channel volume: 55 nL
Applications: Organic solvents resistance
Contents: 1 x Multi8x TL-PEEK-1,0 Add-on
Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-ADD-ON-8x-TL-PEEK-1.0
Multi8x AIO cell Add-on - Thin-layer PEEK-1.0
Organic solvent compatibility. Thin-layer flow-cell to use microfluidic electrochemical sensors in a flow system. Improves the control of fluids. Better precision with low dead volume and low sample. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.
Multi8x AIO cell Add-on - Thin-layer PEEK-1.0
Material: PEEK
Channel volume: 55 nL
Applications: Organic solvents resistance
Contents: 1 x Multi8x TL-PEEK-1,0 Add-on
Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-ADD-ON-8x-TL-PEEK-1.0
Multi8x All-In-One Platform (2xAdd-ons)
AIO multi-drop cell platform with two add-ons for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons.
Multi8x All-In-One Platform (2xAdd-ons)
Material: Aluminium base + methacrylate cover
Dimensions: 120 x 60 x 25 mm (W x D x H)
Contents: Multi8x AIO interface + 2 Multi8x Add-ons (to be chosen) + miniUSB box + cables (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life.
ED-MULTI8x-AIO-CELL-2x
Multi8x All-In-One Platform (2xAdd-ons)
AIO multi-drop cell platform with two add-ons for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons.
Multi8x All-In-One Platform (2xAdd-ons)
Material: Aluminium base + methacrylate cover
Dimensions: 120 x 60 x 25 mm (W x D x H)
Contents: Multi8x AIO interface + 2 Multi8x Add-ons (to be chosen) + miniUSB box + cables (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life.
ED-MULTI8x-AIO-CELL-2x
All-In-One Drop Cell - Base
User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with standard (10x6mm) thin-film (micro)electrodes. Includes the basic assembly parts for the different add-ons.
All-In-One Drop Cell - Base
Material: Aluminium base + methacrylate cover
Dimensions: 60 x 40 x 30 mm (W x D x H)
Contents: Interface + cable (male or female banana end)
Details: Easy and fast electrode replacement. Reusable - long life
ED-AIO-CELL
All-In-One Drop Cell - Base
User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with standard (10x6mm) thin-film (micro)electrodes. Includes the basic assembly parts for the different add-ons.
All-In-One Drop Cell - Base
Material: Aluminium base + methacrylate cover
Dimensions: 60 x 40 x 30 mm (W x D x H)
Contents: Interface + cable (male or female banana end)
Details: Easy and fast electrode replacement. Reusable - long life
ED-AIO-CELL
AIO cell Add-on - Flow Cell PEEK-2.0
Material: PEEK
Electrochemical cell: 2 mm Ø
Applications: Organic solvents resistance
Contents: 1 x FC-PEEK-2,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-AIO-ADD-ON-FC-PEEK-2.0
AIO cell Add-on - Flow Cell PEEK-2.0
Material: PEEK
Electrochemical cell: 2 mm Ø
Applications: Organic solvents resistance
Contents: 1 x FC-PEEK-2,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-AIO-ADD-ON-FC-PEEK-2.0
AIO cell Add-on - Flow Cell PMMA-2.0
Material: PMMA
Electrochemical cell: 2 mm Ø
Contents: 1 x FC-PMMA-2,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-AIO-ADD-ON-FC-PMMA-2.0
AIO cell Add-on - Flow Cell PMMA-2.0
Material: PMMA
Electrochemical cell: 2 mm Ø
Contents: 1 x FC-PMMA-2,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-AIO-ADD-ON-FC-PMMA-2.0
Multi8x AIO cell Add-on - Flow-cell PMMA-2.0
Material: PMMA
Electrochemical cell: 2 mm Ø
Contents: 1 x Multi8x FC-PMMA-2,0 Add-on
Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-ADD-ON-8x-FC-PMMA-2.0
Multi8x AIO cell Add-on - Flow-cell PMMA-2.0
Material: PMMA
Electrochemical cell: 2 mm Ø
Contents: 1 x Multi8x FC-PMMA-2,0 Add-on
Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-ADD-ON-8x-FC-PMMA-2.0
Multi8x AIO cell Add-on - Flow-cell PEEK-2.0
Material: PEEK
Electrochemical cell: 2 mm Ø
Applications: Organic solvents resistance
Contents: 1 x Multi8x FC-PEEK-2,0 Add-on
Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-ADD-ON-8x-FC-PEEK-2.0
Multi8x AIO cell Add-on - Flow-cell PEEK-2.0
Material: PEEK
Electrochemical cell: 2 mm Ø
Applications: Organic solvents resistance
Contents: 1 x Multi8x FC-PEEK-2,0 Add-on
Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.
ED-ADD-ON-8x-FC-PEEK-2.0
Multi8x AIO cell Add-on - Flow-cell PMMA-3.5
Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
Multi8x AIO cell Add-on - Flow-cell PMMA-3.5
Material: PMMA
Electrochemical cell: 3.5 mm Ø
Contents: 1 x Multi8x FC-PMMA-3,5 Add-on
Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-ADD-ON-8x-FC-PMMA-3.5
Multi8x AIO cell Add-on - Flow-cell PMMA-3.5
Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
Multi8x AIO cell Add-on - Flow-cell PMMA-3.5
Material: PMMA
Electrochemical cell: 3.5 mm Ø
Contents: 1 x Multi8x FC-PMMA-3,5 Add-on
Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-ADD-ON-8x-FC-PMMA-3.5
Multi8x AIO cell Add-on - Batch-cell PMMA-5.0
Enables the use of up to eight standard thin-film (micro)electrodes in applications where larger sample volume (up to 400 µL per cell) are required. The batch cell add-on features correspond to a column (A→H) of a 96-well microplate. Compatible with SE1, IDA, IDRA, IDE and mSE thin-film electrodes.
Multi8x AIO cell Add-on - Batch-cell PMMA-5.0
Material: PMMA
Electrochemical cell: up to 5 mm Ø
Sample volume: up to 400 µL
Contents: 1 x Multi8x BC-PMMA-5,0 Add-on
Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6, ED-IDE1, ED-IDE2, ED-IDE3 & ED-IDRA1.
ED-ADD-ON-8x-BC-PMMA-5.0
Multi8x AIO cell Add-on - Thin-layer PMMA-1.0
Material: PMMA
Channel volume: 55 nL
Contents: 1 x Multi8x TL-PMMA-1,0 Add-on
Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-ADD-ON-8x-TL-PMMA-1.0
Multi8x AIO cell Add-on - Thin-layer PMMA-1.0
Material: PMMA
Channel volume: 55 nL
Contents: 1 x Multi8x TL-PMMA-1,0 Add-on
Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-ADD-ON-8x-TL-PMMA-1.0
AIO cell Add-on - Thin Layer PMMA-1.0
Material: PMMA
Channel volume: 55 nL
Contents: 1 x TL-PMMA-1,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-AIO-ADD-ON-TL-PMMA-1.0
AIO cell Add-on - Thin Layer PMMA-1.0
Material: PMMA
Channel volume: 55 nL
Contents: 1 x TL-PMMA-1,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-AIO-ADD-ON-TL-PMMA-1.0
AIO cell Add-on - Flow Cell PMMA-3.5
Wall-jet flow-cell add-on for standard thin-film (micro)electrodes. Ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
AIO cell Add-on - Flow Cell PMMA-3.5
Material: PMMA
Electrochemical cell: 3.5 mm Ø
Contents: 1 x FC-PMMA-3,5 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-AIO-ADD-ON-FC-PMMA-3.5
AIO cell Add-on - Flow Cell PMMA-3.5
Wall-jet flow-cell add-on for standard thin-film (micro)electrodes. Ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
AIO cell Add-on - Flow Cell PMMA-3.5
Material: PMMA
Electrochemical cell: 3.5 mm Ø
Contents: 1 x FC-PMMA-3,5 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-AIO-ADD-ON-FC-PMMA-3.5
AIO cell Add-on - Flow Cell PEEK-3.5
Organic solvent compatibility. Wall-jet flow-cell add-on ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
AIO cell Add-on - Flow Cell PEEK-3.5
Material: PEEK
Electrochemical cell: 3.5 mm Ø
Applications: Organic solvents resistance
Contents: 1 x FC-PEEK-3,5 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-AIO-ADD-ON-FC-PEEK-3.5
AIO cell Add-on - Flow Cell PEEK-3.5
Organic solvent compatibility. Wall-jet flow-cell add-on ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.
AIO cell Add-on - Flow Cell PEEK-3.5
Material: PEEK
Electrochemical cell: 3.5 mm Ø
Applications: Organic solvents resistance
Contents: 1 x FC-PEEK-3,5 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.
ED-AIO-ADD-ON-FC-PEEK-3.5
Auxiliary/Counter Electrode - Platinum
Counter electrode made with highly inert material. Useful for high current measurements or in case the electrode is not integrated on-chip. Compatible with AIO cell, Batch-cell Add-ons and EEP platform.
Auxiliary/Counter Electrode - Platinum
Dimensions: 50 mm length
Electrodes material: Pt wire (0.3 mm Ø)
Applications: External Pt counter electrode
Contents: 1 x Platinum electrode
CE-PT
Auxiliary/Counter Electrode - Stainless Steel
Counter electrode made in an inexpensive material. Stainless-steel electrode keeps a good robustness with a lower cost. Compatible with AIO cell, Batch-cell Add-ons and EEP platform.
Auxiliary/Counter Electrode - Stainless Steel
Dimensions: 50 mm lenght
Electrodes material: SS tube (1.6 mm Ø)
Applications: External SS counter electrode
Contents: 1 x Stainless Steel electrode
CE-SS
Reference Electrode - Ag/AgCl
Silver/Silver Chloride reference electrode provides an highly stable potential along the electrochemical experiments. Compatible with AIO cell, Batch-cell Add-ons and EEP platform.
Reference Electrode - Ag/AgCl
Material: Electrode body is made of high resistance PP (polypropylene).
Dimensions: 50 mm length
Electrodes material: Ag/AgCl wire (1 mm Ø)
Applications: External reference electrode
Contents: 1 x Ag/AgCl electrode
Details: Ag/AgCl reference electrode is provided in a vial with a 3M KCl solution.
RE-Ag/AgCl
Multi8x All-In-One Platform (1xAdd-on)
AIO multi-drop cell platform with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons.
Multi8x All-In-One Platform (1xAdd-on)
Material: Aluminium base + methacrylate cover
Dimensions: 120 x 60 x 25 mm (W x D x H)
Contents: Multi8x AIO interface + 1 Multi8x Add-on (to be chosen) + miniUSB box + cables (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life
ED-MULTI8x-AIO-CELL-1x
Multi8x All-In-One Platform (1xAdd-on)
AIO multi-drop cell platform with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons.
Multi8x All-In-One Platform (1xAdd-on)
Material: Aluminium base + methacrylate cover
Dimensions: 120 x 60 x 25 mm (W x D x H)
Contents: Multi8x AIO interface + 1 Multi8x Add-on (to be chosen) + miniUSB box + cables (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life
ED-MULTI8x-AIO-CELL-1x
Extenal Electrode Platform (EEP)
EEP platform enables the use of external electrodes in the AIO cell in static conditions with the batch-cell add-ons. Compatible with AIO cell, Batch-cell Add-ons, RE-Ag/AgCl, CE-Pt and CE-SS.
Extenal Electrode Platform (EEP)
Material: PLA
Dimensions: 70 x 65 x 35 mm (W x D x H)
Applications: Placement of external electrodes
Contents: EEP AIO base + 2 Arms for external electrodes
Details: Easy AIO-cell fitting. Easy and Fast arm positioning. External electrodes are always placed in the same position.
EEP-AIO-CELL
Flow System - Fitting Pack
The fitting pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
Flow System - Fitting Pack
Contents: Fitting nuts + ferrules
Details: Other pack options are available under request.
FIT-PACK
All-In-One Platform (2xAdd-ons)
AIO drop cell base with two add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-on. The cell is compatible with EEP platform.
All-In-One Platform (2xAdd-ons)
Material: Aluminium base + methacrylate cover
Dimensions: 60 x 40 x 30 mm (W x D x H)
Contents: AIO Drop Cell + 2 Add-ons (to be chosen) + cable (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-CELL-2x
All-In-One Platform (2xAdd-ons)
AIO drop cell base with two add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-on. The cell is compatible with EEP platform.
All-In-One Platform (2xAdd-ons)
Material: Aluminium base + methacrylate cover
Dimensions: 60 x 40 x 30 mm (W x D x H)
Contents: AIO Drop Cell + 2 Add-ons (to be chosen) + cable (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-CELL-2x
All-In-One Platform (1xAdd-on)
AIO drop cell base with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-ons. The cell is also compatible with EEP platform.
All-In-One Platform (1xAdd-on)
Material: Aluminium base + methacrylate cover
Dimensions: 60 x 40 x 30 mm (W x D x H)
Contents: AIO Drop Cell + 1 Add-on (to be chosen) + cable (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-CELL-1x
All-In-One Platform (1xAdd-on)
AIO drop cell base with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-ons. The cell is also compatible with EEP platform.
All-In-One Platform (1xAdd-on)
Material: Aluminium base + methacrylate cover
Dimensions: 60 x 40 x 30 mm (W x D x H)
Contents: AIO Drop Cell + 1 Add-on (to be chosen) + cable (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-CELL-1x
AIO cell Add-on - Thin Layer PEEK-1.0
Organic solvent compatibility. Enable the use of microfluidic electrochemical sensors in a thin-layer (TL) based flow approach. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.
AIO cell Add-on - Thin Layer PEEK-1.0
Material: PEEK
Channel volume: 55 nL
Applications: Organic solvents resistance
Contents: 1 x TL-PEEK-1,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. ompatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-AIO-ADD-ON-TL-PEEK-1.0
AIO cell Add-on - Thin Layer PEEK-1.0
Organic solvent compatibility. Enable the use of microfluidic electrochemical sensors in a thin-layer (TL) based flow approach. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.
AIO cell Add-on - Thin Layer PEEK-1.0
Material: PEEK
Channel volume: 55 nL
Applications: Organic solvents resistance
Contents: 1 x TL-PEEK-1,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. ompatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-AIO-ADD-ON-TL-PEEK-1.0
LSP01-2A Single-channel Syringe Pump
Just infusion high-precision single-channel syringe pump with 1 µm/min minimum linear speed. The acceptable syringe specification is from 10 μL to 60 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
LSP01-2A Single-channel Syringe Pump
Dimensions: 280 x 210 x 140 mm (D x W x H)
Working mode: Infusion
Channels: 1
Advance per step: 0.031 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.16 nL/min – 10.8 mL/min
Syringe size: 10 µL – 60 mL
Comm. interface: RS485
Pump stroke: 140 mm
Max. linear rate: 13 mm/min
Min. linear rate: 1 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.6 Kg
Certificates: CE
LSP01-2A
TJ-3A Single-channel Syringe Pump
Infusion/withdrawal single-channel syringe pump. The acceptable syringe specifications are from 10 µL to 60 mL. Suitable for high accuracy and small flow rate liquid transferring. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
TJ-3A Single-channel Syringe Pump
Dimensions: 170 x 108 x 70 mm / 245 x 100 x 95 mm (controller / drive unit) (D X W X H)
Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous
Channels: 1
Advance per step: 0.165 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.139 µL/min – 52.9 mL/min
Syringe size: 1 - 60 mL
Comm. interface: RS485
Pump stroke: 90 mm
Max. linear rate: 79.4 mm/min
Min. linear rate: 7.9 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 10W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 0.8 Kg (controller) 1.3 Kg (drive unit)
Certificates: CE
TJ-3A/W0109-1B
Flow System - Basic Pack
The basic pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
- Plastic syringes (10 mL) - 5 units
- Disposable scalpel - 1 unit
Flow System - Basic Pack
Contents: Fitting nuts + ferrules + tubing + syringes + scalpel
Details: Other pack options are available under request.
B-PACK
Flow System - Basic-Plus Pack
The plus-pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
- Glass reservoir (GL32 thread - 50 mL) with standard cap - 2 units
- Bottle cap (GL32 thread/ 2 x Luer ports) - 2 units
- Plastic syringes (10 mL) - 5 units
- Disposable scalpel - 1 unit
Flow System - Basic-Plus Pack
Contents: Fitting nuts + ferrules + tubing + reservoirs + syringes + scalpel
Details: Other pack options are available under request.
B-PACK+
Standalone Desktop LCD Digital Microscope
Up to 1200x magnified and LED Illuminated viewing. Perfect complement for a wide range of applications such as inspection of electronics, microfluidic channels, electrodes, etc. Compatible with PC, MAC and iPad.
Standalone Desktop LCD Digital Microscope
Dimensions: 22.9 x 15.2 x 15.2 cm
Image sensor: 5 MegaPixel (up to 12M by interpolation)
Focus range: Manual focus from 10mm to 30mm
Light source: 8 LEDS with adjustable brightness
Digital magnification: Up to 1200x
Optical magnification: 10x to 300x
Battery power: Rechargeable 1050 mAh Li-ion Battery
Working time: 2 hours
Charge time: 3 hours
Software compatibility: Windows XP SP2/Vista/7/8/10 and Mac 10.6-10.8
Video format: AVI
Video capture resolution: VGA, QVGA - 30 fps
Software languages: English, German, French, Spanish, Russian, Italian, Portuguese, Dutch, Polish, Japanese, Korean, Chinese
On screen display languages: English, German, French, Spanish, Italian, Portuguese, Dutch, Japanese, Chinese Simplified, Chinese Traditional
LCD screen: 3.5" LCD screen, 4:3 ratio, resolution 320x240 pixels
microSD card capacity: Up to 32GB microSDHC
TV output: Yes
Weight: 0.9 Kg
Certificates: CE, FCC approval, RoHS compliance
Controller: High speed DSP
Flicker rate: 50Hz/60Hz
SDM-1200x-LCD
Flow System - Full Pack
The full-pack contains all the accesories for using using MicruX’ thin-film (micro)electrodes in flow systems with All-in-One platform. This pack includes:
- AIO-CELL-1x + 25 standard electrodes.
- Peristaltic pump and injection valve.
- Fittings, ferrules and tubing.
- Glass reservoir and other material.
Flow System - Full Pack
Contents: AIO Cell + 1 Add-on + 25 standard thin-film electrodes + fitting system + reservoir + other accessories
Details: Other pack options; with different peristaltic or syringe pumps, accessories…, are also available on demand. Packs might be customized taking into account the specific requirements of customers.
F-PACK-AIO
iHVStat Electrophoresis System
Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
iHVStat Electrophoresis System
Dimensions: 165 x 150 x 95 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.
iHVSTAT
iHVStat Electrophoresis System
Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
iHVStat Electrophoresis System
Dimensions: 165 x 150 x 95 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.
iHVSTAT
HVStat Electrophoresis System
Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
HVStat Electrophoresis System
Dimensions: 165 x 150 x 85 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.
HVSTAT
HVStat Electrophoresis System
Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
HVStat Electrophoresis System
Dimensions: 165 x 150 x 85 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.
HVSTAT
Microfluidic Chip Holder
Basic interface for microchips electrophoresis integrating electrode connections for detection and HV as well as wells for buffer solution, sample waste and detection. Compatible with microfluidic electrophoresis chips, HVStat and iHVStat instruments.
Microfluidic Chip Holder
Material: PMMA
Dimensions: 100 x 65 x 15 mm (L x W x H)
Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.
Contents: Microfluidic Chip Interface
Details: Integrated wells, HV electrodes, 2-mm female bananas. Reusable.
MCE-HOLDER-DC02
Drop-cell Connector
Easy to use interface for thin-film electrodes. Universal cable compatible with any commercial potentiostat included. Long-life platform recommended for stationary electrochemical experiments.
Drop-cell Connector
Material: Aluminium base + methacrylate cover
Dimensions: 40 x 30 x 25 mm (W x D x H)
Contents: Interface + cable (male or female banana end)
Details: User friendly (tool free assembly) for easy and fast replacement of the electrodes. Reusable - long-life.
ED-DROP-CELL
Multi-electrode Chip Platform
The Multi-E Platform provides a simple and robust interface with a multi-potentiostat for using the thin-film multi-electrode chips. Compatible with ED-SE-8x, ED-SE-16x, ED-IDE10-12x and ED-IDE5-12x.
Multi-electrode Chip Platform
Material: Aluminium base + methacrylate cover
Dimensions: 70 x 95 x 25 mm (W x D x H)
Applications: Multiplexing electrochemical analysis
Contents: ME Platform + 2 miniUSB boxes + cables (male or female banana end)
Details: Easy and fast replacement of the chips. Compatible with up to two 18.5x15 mm chips or one 37x15 mm chip. User friendly (tool free assembly). Reusable – long-life.
ED-ME-CELL
Lab Practice - iFull PACK
The most complete i-pack provides all the tools necessaries for introducing the students in the use of miniaturized instrumentation and microfluidic devices. This i-pack includes:
- MicruX® iHVStat Instrument + Accessories
- Microfluidic Chip Holder
- Microfluidic Electrophoresis Chips
- Teacher & student's guides
- Excel Template
- Reagents & other material (syringes, filters, sample containers…)
Lab Practice - iFull PACK
Dimensions: 165 x 150 x 95 mm (L x W x H)
Contents: iHVStat + Microfluidic Holder + Standard Pack (MEs + Guides + Reagents)
Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.
MXF-iPLAB-FP
Lab Practice - Full PACK
The most complete pack provides all the tools necessaries for introducing the students in the use of miniaturized instrumentation and microfluidic devices. This pack includes:
- MicruX® HVStat Instrument + Accessories
- Microfluidic Chip Holder
- Microfluidic Electrophoresis Chips
- Teacher & student's guides
- Excel Template
- Reagents & other material (syringes, filters, sample containers…)
Lab Practice - Full PACK
Dimensions: 165 x 150 x 85 mm (L x W x H)
Contents: HVStat + Microfluidic Holder + Standard Pack (MEs + Guides + Reagents)
Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.
MXF-PLAB-FP
Lab Practice - Standard PACK
The standard pack includes:
- Microfluidic Electrophoresis Chips
- Teacher & student’s guides
- Excel Template
- Reagents & other material (syringes, filters, sample containers…)
Lab Practice - Standard PACK
Contents: MEs + Guides + Reagents
Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.
MX-PLAB-SP
Lab Paractice - Basic PACK
The basic pack includes:
- Teacher & student’s guide
- Excel Template
- Reagents & other material (syringes, filters, sample containers…)
Lab Paractice - Basic PACK
Contents: Guides + Reagents
Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.
MX-PLAB-BP
Lab Practice - Spare Kit
The spare kit for lab practices includes:
- Reagents
- Other material (syringes, filters, sample containers…)
Lab Practice - Spare Kit
Contents: Reagents
Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.
MXF-PLAB-SK
Lab Practice - Spare Kit
The spare kit for lab practices includes:
- Reagents
- Other material (syringes, filters, sample containers…)
Lab Practice - Spare Kit
Contents: Reagents
Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.
MXF-PLAB-SK
NE-300 Just Infusion Syringe Pump
NE-300 offers the most basic pumping system at a very affordable price. Infusion only, does not withdraw, volume target, nor have computer interface or programmability.
NE-300 Just Infusion Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed
Maximum speed: 38 mm/min
Minimum speed: 0.7 µm/min
Linear force: > 150 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 12 nL/min - 20 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-300
NE-1000 Full Featured Standalone Single-Syringe Pump
NE-1000 family offers a fully programmable syringe pump with infusion and withdrawal mode. It holds one syringe from 1 to 60 mL with infusion rates from 0.01 µL/min to 30 mL/min.
NE-1000 Full Featured Standalone Single-Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed
Maximum speed: 51 mm/min
Minimum speed: 0.7 µm/min
Linear force: > 150 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 12 nL/min - 30 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
Details: Lower (NE-1002X) and higher (NE-1010) flow rate models are available. Other Features: • Built for Automation. • Operates stand-alone or from a computer. • Easy-to-use keypad interface. • Applications range from simple infusions to complex pumping progra
NE-1000
NE-4000 Dual-channel Syringe Pump
NE-4000 dual-channel syringe pump offers full-featured programmable capabilities with infusion and withdrawal mode.It is able to hold two syringes up to 60 mL with pumping rates from 25 µL/min to 100 mL/min. A 140 mL syringe can be filled up to 120 mL.
NE-4000 Dual-channel Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 2
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed
Maximum speed: 184 mm/min
Minimum speed: 1.3 µm/min
Linear force: > 400 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 25 µL/min - 100 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-4000
NE-1600 Multi-channel (6) Syringe Pump
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 6 channels with infusion/withdrawal). NE-1600 holds 2, 4 or 6 syringes of up to 60 mL each or 2 or 4 syringes up to 140 mL each with infusion rates from 0.008 µL/min to 40 mL/min.
NE-1600 Multi-channel (6) Syringe Pump
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 6
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1600
NE-1800 Multi-channel (8) Syringe Pump
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 8 channels). NE-1800 series allows infusion and withdrawal, and holds 2, 4, 6 or 8 syringes of up to 10 mL each with infusion rates from 0.008 µL/min to 5,7 mL/min.
NE-1800 Multi-channel (8) Syringe Pump
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 8
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1800
NE-1200 Multi-channel (12) Syringe Pumps
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 12 channels). NE-1200 series allow infusion and withdrawal, and holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 mL each with infusion rates from 0.008 µL/min to 2.0 mL/min.
NE-1200 Multi-channel (12) Syringe Pumps
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 12
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1200
Thin-film Double-metal Single Electrode
Three electrode approach with gold WE and platinum RE and AE for selective coating processes. Good intra- and inter-electrode reproducibility. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Double-metal Single Electrode
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: WE: Ti / Au - RE: Ti / Pt - AE: Ti / Pt
Electrodes thickness: 50/150 nm
WE size: 1 mm Ø (0.8 mm2)
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 25 units/box
ED-SE1-AuPt (25 units/box)
Thin-film Platinum 5µm-Microelectrode Array
Three electrode platinum approach. WE coated with SU8 resin defining 5 µm microholes array with honeycomb structure. Useful for, oxygen, amonia, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum 5µm-Microelectrode Array
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microholes diameter: 5 µm
Microholes number: 500
Microholes pitch: 50 µm
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-mSE-5-Pt (50 units/box)
Thin-film Platinum 10µm-Microelectrode Array
Three electrode platinum approach. WE coated with SU8 resin defining 10 µm microholes array with honeycomb structure. Useful for, oxygen, amonia, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum 10µm-Microelectrode Array
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microholes diameter: 10 µm
Microholes number: 90
Microholes pitch: 100 µm
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-mSE-10-Pt (50 units/box)
Thin-film Gold 10µm-Microelectrode Array
Three electrode gold approach. WE coated with SU8 resin defining 10 µm microholes array with honeycomb structure. Useful for, thiols, DNA, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold 10µm-Microelectrode Array
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microholes diameter: 10 µm
Microholes number: 90
Microholes pitch: 100 µm
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-mSE-10-Au (50 units/box)
Thin-film Gold 5µm-Microelectrode Array
Three electrode gold approach. WE coated with SU8 resin defining 5 µm microholes array with honeycomb structure. Useful for, thiols, DNA, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold 5µm-Microelectrode Array
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microholes diameter: 5 µm
Microholes number: 500
Microholes pitch: 50 µm
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-mSE-5-Au (50 units/box)
Thin-film Platinum InterDigitated Electrode (10/10 µm)
90 pairs of interdigitated platinum electrodes (10/10 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, scanning electrochemistry microscopy, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum InterDigitated Electrode (10/10 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 3.5 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 10 µm
Number of fingers: 90 pairs
Applications: Impedance, capacitance and conductivity measurements, fuel cells
Contents: 50 units/box
ED-IDE1-Pt (50 units/box)
Thin-film Platinum InterDigitated Electrode (10/5 µm)
120 pairs of interdigitated platinum electrodes (10/5 µm, electrode/gap). Useful for optics, electrochemistry (impedance, conductivity...), scanning electrochemistry microscopy, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum InterDigitated Electrode (10/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 3.5 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 5 µm
Number of fingers: 120 pairs
Applications: Impedance, capacitance and conductivity measurements, fuel cells
Contents: 50 units/box
ED-IDE2-Pt (50 units/box)
Thin-film Platinum InterDigitated Electrode (5/5 µm)
180 pairs of interdigitated platinum electrodes (5/5 µm, electrode/gap). Useful for optics, electrochemistry, scanning electrochemistry microscopy, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum InterDigitated Electrode (5/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 3.5 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microelectrode width: 5 µm
Microelectrode gap: 5 µm
Number of fingers: 180 pairs
Applications: Impedance, capacitance and conductivity measurements, fuel cells
Contents: 50 units/box
ED-IDE3-Pt (50 units/box)
Thin-film Gold InterDigitated Electrode (10/10 µm)
90 pairs of interdigitated gold electrodes (10/10 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, spectroelectrochemistry, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold InterDigitated Electrode (10/10 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 3.5 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 10 µm
Number of fingers: 90 pairs
Applications: Impedance, capacitance and conductivity measurements, fuel cells
Contents: 50 units/box
ED-IDE1-Au (50 units/box)
Thin-film Gold InterDigitated Electrode (10/5 µm)
120 pairs of interdigitated gold electrodes (10/5 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, spectroelectrochemistry, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold InterDigitated Electrode (10/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 3.5 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 5 µm
Number of fingers: 120 pairs
Applications: Impedance, capacitance and conductivity measurements, fuel cells
Contents: 50 units/box
ED-IDE2-Au (50 units/box)
Thin-film Gold InterDigitated Electrode (5/5 µm)
180 pairs of interdigitated gold electrodes (5/5 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, spectroelectrochemistry, etc. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold InterDigitated Electrode (5/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 3.5 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microelectrode width: 5 µm
Microelectrode gap: 5 µm
Number of fingers: 180 pairs
Applications: Impedance, capacitance and conductivity measurements, fuel cells
Contents: 50 units/box
ED-IDE3-Au (50 units/box)
Thin-film Platinum InterDigitated Array Microelectrode (10/10 µm)
15 pairs interdigitated platinum electrodes (10/10 µm, electrode/gap) integrating reference and counter electrodes. Useful for gas sensor (oxygen, nitrogen dioxide…), explosives, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum InterDigitated Array Microelectrode (10/10 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 10 µm
Number of fingers: 15 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDA1-Pt (50 units/box)
Thin-film Platinum InterDigitated Array Microelectrode (10/5 µm)
20 pairs interdigitated platinum electrodes (10/5 µm, electrode/gap) integrating reference and auxiliary electrodes. Useful for gas sensor (oxygen, nitrogen dioxide…), explosives, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum InterDigitated Array Microelectrode (10/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 5 µm
Number of fingers: 20 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDA5-Pt (50 units/box)
Thin-film Platinum InterDigitated Array Microelectrode (5/5 µm)
30 pairs interdigitated platinum electrodes (5/5 µm, electrode/gap) integrating reference and counter electrode. Useful for gas sensor (oxygen, nitrogen dioxide…), explosives, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum InterDigitated Array Microelectrode (5/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microelectrode width: 5 µm
Microelectrode gap: 5 µm
Number of fingers: 30 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDA6-Pt (50 units/box)
Thin-film Gold InterDigitated Array Microelectrode (10/10 µm)
15 pairs interdigitated gold electrodes (10/10 µm, electrode/gap) integrating reference and auxiliary electrodes. Useful for thiols, uric acid, ascorbic acid, cancer biomarkers, insecticides, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold InterDigitated Array Microelectrode (10/10 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 10 µm
Number of fingers: 15 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDA1-Au (50 units/box)
Thin-film Gold InterDigitated Array Microelectrode (10/5 µm)
20 pairs interdigitated gold electrodes (10/5 µm, electrode/gap) integrating reference and counter electrodes. Useful for thiols, uric acid, ascorbic acid, cancer biomarkers, insecticides, etc detection. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold InterDigitated Array Microelectrode (10/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 5 µm
Number of fingers: 20 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDA5-Au (50 units/box)
Thin-film Gold InterDigitated Array Microelectrode (5/5 µm)
30 pairs interdigitated gold electrodes (5/5 µm, electrode/gap) integrating reference and auxiliary electrodes. Useful for thiols, uric acid, ascorbic acid, cancer biomarkers, insecticides, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold InterDigitated Array Microelectrode (5/5 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microelectrode width: 5 µm
Microelectrode gap: 5 µm
Number of fingers: 30 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDA6-Au (50 units/box)
Thin-film Platinum InterDigitated Ring Array microelectrode (10/10 µm)
12 pairs interdigitated platinum electrodes (10/10 µm, electrode/gap) with radial design focused on flow analysis systems. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum InterDigitated Ring Array microelectrode (10/10 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 10 µm
Number of fingers: 12 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDRA1-Pt (50 units/box)
Thin-film Gold InterDigitated Ring Array Microelectrode (10/10 µm)
12 pairs interdigitated gold electrodes (10/10 µm, electrode/gap) with radial design focused on flow analysis systems. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold InterDigitated Ring Array Microelectrode (10/10 µm)
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
Microelectrode width: 10 µm
Microelectrode gap: 10 µm
Number of fingers: 12 pairs
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-IDRA1-Au (50 units/box)
Thin-film Platinum Single Electrode
Three electrode platinum approach. Good intra- and inter-electrode reproducibility. Useful for oxygen, amonia, etc... detection as well as gas sensor development. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Platinum Single Electrode
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Pt
Electrodes thickness: 50/150 nm
WE size: 1 mm Ø (0.8 mm2)
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-SE1-Pt (50 units/box)
Thin-film Gold Single Electrode
Three electrode gold approach. Good intra- and inter-electrode reproducibility. Useful for explosive, thiols, DNA, etc... detection as well as enzyme and immunosensors. Compatible with Drop, AIO and Multi8x AIO cell.
Thin-film Gold Single Electrode
Dimensions: 10 x 6 x 0.75 mm
Substrate: Glass
Insulating layer: SU8/PI resin
Electrochemical cell: 2 mm Ø
Electrodes material: Ti / Au
Electrodes thickness: 50/150 nm
WE size: 1 mm Ø (0.8 mm2)
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-SE1-Au (50 units/box)
127 Products. View all
Delivery
We ship the products under strict security measures, ensuring their protection...
More information
- Mora-Garay Industrial Park · Building #6 · Juan de la Cierva, 2C, 33211 Gijón (Asturias), Spain
- Phone/Fax: (+34) 984 151 019
- Email: info@micruxfluidic.com
- Web: www.micruxfluidic.com
Contact
MICRUX® - All rights reserved - 2024