• |

Shop

AIO cell Add-on - Batch Cell PEEK-5.0

AIO cell Add-on - Batch Cell PEEK-5.0

Organic solvent compatibility. Perfect add-on for applications where larger sample volume are required (up to 400 µL). Compatible with standard thin-film electrodes and EEP platform.

AIO cell Add-on - Batch Cell PEEK-5.0

Material: PEEK

Electrochemical cell: 5.0 mm Ø

Sample volume: up to 400 µL

Applications: Organic solvents resistance

ED-AIO-ADD-ON-BC-PEEK-5.0

AIO cell Add-on - Batch Cell PEEK-5.0

AIO cell Add-on - Batch Cell PEEK-5.0

Organic solvent compatibility. Perfect add-on for applications where larger sample volume are required (up to 400 µL). Compatible with standard thin-film electrodes and EEP platform.

AIO cell Add-on - Batch Cell PEEK-5.0

Material: PEEK

Electrochemical cell: 5.0 mm Ø

Sample volume: up to 400 µL

Applications: Organic solvents resistance

ED-AIO-ADD-ON-BC-PEEK-5.0

AIO cell Add-on - Batch Cell PMMA-5.0

AIO cell Add-on - Batch Cell PMMA-5.0

Enables the use of the standard thin-film (micro)electrodes in applications where larger sample volumen are required (up to 400 µL). Compatible with EEP platform.

AIO cell Add-on - Batch Cell PMMA-5.0

Material: PMMA

Electrochemical cell: 5.0 mm Ø

Sample volume: up to 400 µL

ED-AIO-ADD-ON-BC-PMMA-5.0

AIO cell Add-on - Batch Cell PMMA-5.0

AIO cell Add-on - Batch Cell PMMA-5.0

Enables the use of the standard thin-film (micro)electrodes in applications where larger sample volumen are required (up to 400 µL). Compatible with EEP platform.

AIO cell Add-on - Batch Cell PMMA-5.0

Material: PMMA

Electrochemical cell: 5.0 mm Ø

Sample volume: up to 400 µL

ED-AIO-ADD-ON-BC-PMMA-5.0

NE-1002X Programmable Microfluidics Single-Syringe Pump

NE-1002X Programmable Microfluidics Single-Syringe Pump

NE-1002X is a fully programmable syringe pump with infusion and withdrawal mode. It can holds 1 syringe up to 60 mL with infusion rates from 0.008 nL/hr  to 2545 µL/min. It is also available in two channel version (Model NE-4002X)

NE-1002X Programmable Microfluidics Single-Syringe Pump

Dimensions: 229 x 146 x 114 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: 1

Motor type: Step motor

Motor step per revolution: 400

Microstepping: 1/16 to 1/2 depending on motor speed

Advance per step: 4.252 nm to 34.018 nm depending on motor speed

Maximum speed: 2.24 mm/min

Minimum speed: 0.014 µm/min

Accuracy: ≤± 0,5 %

Flow rate: 0.007nL/hr to 2505 µL/min

Syringe size: 1 - 60 mL (140 mL partially filled)

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 1.63 Kg

Certificates: CE

NE-1002X

NE-4002X Programmable Microfluidics Dual-Channel Syringe Pump

NE-4002X Programmable 2 Channel Microfluidics Syringe Pump

NE-4002X is a fully programmable 2 channel syringe pump with infusion and withdrawal mode. It can holds 2 syringe up to 60 mL with infusion rates from 0.007 nL/hr  to 1479 µL/min. 

NE-4002X Programmable Microfluidics Dual-Channel Syringe Pump

Dimensions: 229 x 146 x 114 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: 2

Motor type: Step motor

Motor step per revolution: 200

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed

Maximum speed: 184 mm/min

Minimum speed: 1.3 µm/min

Accuracy: ≤± 0,5 %

Flow rate: 0.007 nL/hr to 1480 µL/min

Syringe size: 1 - 60 mL (140 mL partially filled)

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 1.63 Kg

Certificates: CE

NE-4002X

NE-8000 High Pressure Programmable Single-Syringe Pump

NE-8000 High Pressure Programmable Single Syringe Pump

NE-8000 is a fully programmable stand-alone high pressure syringe pump with infusion and withdrawal mode. It holds 1 syringe up to 140 mLwith infusion rates from 1.733 µL/hr to 340.6 mL/min

Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump
Using 2 NE-8000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.

NE-8000 High Pressure Programmable Single-Syringe Pump

Dimensions: 285 x 155 x 162 mm (L x W x H)

Working mode: Infusion/withdrawal

Channels: 1

Motor type: Step motor

Motor step per revolution: 200

Microstepping: 1/8 to 1/1 depending on motor speed

Advance per step: 0.505 µm to 4.042 µm depending on motor speed

Maximum speed: 300.3 mm/min

Minimum speed: 1.66 µm/min

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 1.726 µL/hr to 247.40 mL/min

Syringe size: 0.5 µL - 140 mL

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Weight: 3.5 kg

Certificates: CE

NE-8000

MicruX ECStat

ECStat Electrochemical Station

USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platformsthick-film and thin-film electrodes.

ECStat Electrochemical Station

Dimensions: 160 x 100 x 45 mm (L x W x H)

Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer

LED indicators: power on, cell on

Comm. interface: USB-C

Power supply: USB

Operating temperature: 0 ºC to +50 ºC

DC-potential range: ± 10 V

Compliance voltage: ± 10 V

DC-potential resolution: 75 µV

Applied potential accuracy: ≤ 0.1% ± 1 mV offset

Current ranges: 100 pA to 10 mA (9 ranges)

Maximun DC current: ± 30 mA

Current accuracy: ≤ 0.1 % (at Full Scale Range)

Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)

EIS - Frequency range: 10 μHz to 1 MHz

EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p

Housing: Aluminum case

Weight: < 0.5 Kg

Certificates: CE

Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.

ECSTAT

MicruX ECStat

ECStat Electrochemical Station

USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platformsthick-film and thin-film electrodes.

ECStat Electrochemical Station

Dimensions: 160 x 100 x 45 mm (L x W x H)

Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer

LED indicators: power on, cell on

Comm. interface: USB-C

Power supply: USB

Operating temperature: 0 ºC to +50 ºC

DC-potential range: ± 10 V

Compliance voltage: ± 10 V

DC-potential resolution: 75 µV

Applied potential accuracy: ≤ 0.1% ± 1 mV offset

Current ranges: 100 pA to 10 mA (9 ranges)

Maximun DC current: ± 30 mA

Current accuracy: ≤ 0.1 % (at Full Scale Range)

Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)

EIS - Frequency range: 10 μHz to 1 MHz

EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p

Housing: Aluminum case

Weight: < 0.5 Kg

Certificates: CE

Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.

ECSTAT

Printed Carbon Single Electrode

Thick-film Carbon Electrode

Carbon-based screen-printed electrodes with a classical three-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Useful for developing low-cost, disposable chemical sensors and biosensors. Different accessories available.

Thick-film Carbon Electrode

Dimensions: 27.5 x 10.1 x 0.35 mm

Substrate: PET (white)

Electrodes material: WE: C / RE: Ag / AE: C

WE size: 3 mm Ø (7.1 mm2)

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-S1PE-C (50 units/box)

AIO-SPE

All-In-One SPE Platform (1xAdd-on)

AIO-SPE cell with one add-on for using printed electrodes in static or dynamic conditions. Compatible with Flow or Batch add-ons. The cell is also compatible with EEP platform.

All-In-One SPE Platform (1xAdd-on)

Material: Aluminium base + methacrylate add-ons

Dimensions: 60 x 40 x 15/30 mm (W x D x H)

Contents: AIO cell + 1 Add-on (to be chosen) + SPE cable (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-SPE-CELL-1x

All-In-One SPE Platform (2xAdd-ons)

AIO-SPE cell with two add-ons for using printed electrodes in static and dynamic conditions. The cell includes the Flow and Batch add-ons. The cell is also compatible with EEP platform

All-In-One SPE Platform (2xAdd-ons)

Material: Aluminium base + methacrylate add-ons

Dimensions: 60 x 40 x 15/30 mm (W x D x H)

Contents: AIO cell + 2 Add-ons (Flow and Batch) + SPE cable (male or female banana end)

Details: Easy and fast electrode replacement. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-SPE-CELL-2x

112 Products. View all

Returns

All the information that you should know about our returns policy...

More information

Contact

Contact us to solve your doubts or answer your questions. We can help you!

More information

Delivery

We ship the products under strict security measures, ensuring their protection...

More information

subscribe to our monthly newsletter